Saw Sharpening



Product Image Item Name- Price
10 inch 'Crosscut' or 'Great American' file

10 inch 'Crosscut' or 'Great American' file

For big-tooth saws with a pitch of 2 or less teeth per inch e.g. saws over 36 inches long or our other product Peg tooth saw blank 2 points per inch....
£14.95

[more]

6 inch 'Crosscut' or 'Great American' file

6 inch 'Crosscut' or 'Great American' file

For saws with a pitch of 4 or less teeth per inch. Because the file is single cut it leaves the tooth smooth in contrast to aggressive double cut...
£9.95

[more]

8 inch 'Crosscut' or 'Great American' file

8 inch 'Crosscut' or 'Great American' file

For big-tooth saws with a pitch of 3 or less teeth per inch e.g. saws over 36 inches long or our other product Peg tooth saw blank 2 points per inch....
£11.95

[more]

8 inch Hand-stitched Rasp

8 inch Hand-stitched Rasp

Because these rasps are punched by hand every tooth cuts in a slightly different place. The image shows the teeth are not perfectly aligned. They are...
£29.95

[more]

Axe File

Axe File

The axe file has a coarse double-cut side and a fine single-cut smooth side. Start with the double-cut coarse side for rapid removal of metal then...
£17.95

[more]

D handles

D handles

This handle-blank is slotted and ready for insertion of a sawplate. Fixings of 4mm bolts and tee-nuts included. You can quickly shape this to fit...
£24.95

[more]

Jointing file 8"

Jointing file 8"

Put this in a jointer and file off the tops from your saw teeth to bring them all to the same height. This flattens those teeth even slightly taller...
£10.95

[more]

Saw Jointer with wedge

Saw Jointer with wedge

This device keeps the file at right-angles to the saw as you push down on it - and your fingers away from the teeth. It is far safer and more...
£24.95

[more]

Saw Spider

Saw Spider

£19.95

[more]

Saw Vise

Saw Vise

An elegant device usable on ALL saws but especially those under 26 inches. Either clamp it to a horizontal plank or table or fix it vertically in a...
£58.95

[more]

Side dressing file

Side dressing file

Most commonly used to remove rust-pits from the sides of teeth and also to taper-grind a saw plate.
£19.95

[more]

Straight Edge

Straight Edge

Place this perfectly flat piece of steel over any 3 teeth. If any are out of joint there will be a gap. Pass a feeler gauge between this plate and a...
£14.95

[more]


Copyright © 2024 Woodland Craft Supplies.